V3307-DI-T-E3B
GENERAL SPECIFICATION
- Engine model
- V3307-DI-T-E3B
- Emission regulation
- EPA/CARB interim Tier 4 + EU Stage IIIA
- Type
- Vertical, water cooled 4-cycle diesel engine
- Cylinders
- 4
- Bore and stroke
- mm (in)
- 94.0 x 120.0 (3.70 x 4.724)
- Displacement
- L (cu.in)
- 3.331 (203.3)
- Aspiration
- Turbocharged
- Aftertreatment
- -
- Rated output / speed*1
- kW (HP) / rpm
- 55.4 (74.3) / 2600
- Maximum torque / speed*1
- Nm (lb-ft) / rpm
- 265.0 (195.0) / 1600
- Combustion system
- Direct injection
- Fuel system
- In-line pump
- Length x Width x Height*2
(without aftertreatment unit) - mm (in)
- 655 x 500 x 739 (25.8 x 19.7 x 29.1)
- Length x Width x Height*3
(with aftertreatment unit) - mm (in)
- -
- Dry weight
- kg (lb)
- 268 (591)
-
Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.
-
1: SAE J1995 gross intermittent
*2: Exclude cooling fan and exclude aftertreatment unit
*3: Exclude cooling fan and include aftertreatment unit on engine
Photographs may show non-standard equipment.
DIMENSIONS
Dimensions and weight depend on composed specifications.
PERFORMANCE CURVES
FEATURES and BENEFITS
Proven Reliability and Technology
The Kubota 07 Series has been developed to meet the various
requirements of a wide range of industrial applications.
Kubota’s unique cylinder block design was developed using our
original casting technology, enabling larger displacement within
the current 2.4L compact engine package.
The improved cooling system, with a main water gallery and water
passages between cylinder bores as a heat load countermeasure,
provides high power density and superior endurance in the reliable
Kubota 07 Series.
Emissions
Kubota 07 Series engines comply with EPA / CARB interim Tier 4
+ EU Stage IIIA level emissions regulations.
These engines meet emissions regulations with minimal additional
required devices. For example, NOx is reduced by mechanical
means alone, including the use of a compact cooled exhaust gas
recirculation (EGR) system.
Clean and Quiet Power
Kubota’s original E-CDIS (Center Direct Injection System) combustion
system, renowned for the clean combustion it provides for the Kubota
V3 (DI) Series, has been updated. The fuel injection pressure has been
increased and the combustion chamber redesigned to achieve lower
particulate matter (PM) levels, resulting in better conditions.
In addition, these engines have been designed to reduce transmitted
vibrations and radiated sound, resulting in low noise levels.
Options
A side PTO option is available. Kubota 07 Series engines offer
a power take-off (PTO) located at the gear train on the flywheel
side that is designed to enable compact positioning of PTO hydraulic
devices. In response to the trend of the use of hydraulic control
devices in industrial machines, we have made it possible to install
up to three hydraulic pumps with different capacities.
Fan positions are available at two heights to enable two types of
equipment configurations.