V2403-M-T-E3B
GENERAL SPECIFICATION
- Engine model
- V2403-M-T-E3B
- Emission regulation
- EPA/CARB interim Tier 4 + EU Stage IIIA
- Type
- Vertical, water cooled 4-cycle diesel engine
- Cylinders
- 4
- Bore and stroke
- mm (in)
- 87.0 x 102.4 (3.43 x 4.031)
- Displacement
- L (cu.in)
- 2.434 (148.5)
- Aspiration
- Turbocharged
- Aftertreatment
- -
- Rated output / speed*1
- kW (HP) / rpm
- 44.0 (59.0) / 2700
- Maximum torque / speed*1
- Nm (lb-ft) / rpm
- 165.1 (122.0) / 1800
- Combustion system
- Indirect injection
- Fuel system
- In-line pump
- Length x Width x Height*2
(without aftertreatment unit) - mm (in)
- 646 x 495 x 725 (25.4 x 19.5 x 28.5)
- Length x Width x Height*3
(with aftertreatment unit) - mm (in)
- -
- Dry weight
- kg (lb)
- 201 (443)
-
Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.
-
1: SAE J1995 gross intermittent
*2: Exclude cooling fan and exclude aftertreatment unit
*3: Exclude cooling fan and include aftertreatment unit on engine
Photographs may show non-standard equipment.
DIMENSIONS
Dimensions and weight depend on composed specifications.
PERFORMANCE CURVES
FEATURES and BENEFITS
Emissions
V2403-M turbocharged engines comply with EPA / CARB interim
Tier 4 + EU Stage IIIA emissions regulations.
Durable Power
The Kubota V2403-M-T engine is a high power density engine
that delivers the highest output within the Kubota 03-M Series.
By expanding the bore and stroke, Kubota has increased engine
displacement. The cooling water passages between the
cylinder bores features Kubota’s original casting technology as
a countermeasure against the heat load caused by high power
density, providing both superior endurance and reliable engine
performance.
With numerous features such as a built-in solenoid, low fan
position, and single-side serviceability, this engine provides
excellent performance and flexibility.
Clean and Quiet Power
Kubota’s original E-TVCS (Three Vortex Combustion System) has
been improved. The airflow, combustion chamber, and piston
recess have been optimized to provide lower particulate matter
(PM) levels.
The half-float valve cover and MoS2-coated pistons reduce noise
levels and decrease vibrations transmitted from the valve area,
providing enhanced noise reduction.
Option
Kubota 03-M Series engines offer side power take-off (PTO) in
response to the trend of the use of hydraulic control devices in
industrial machines. A hydraulic pump can be installed at the two
side PTO locations.
A direct injection engine is also available.