V2403-M-DI-T-E3B
GENERAL SPECIFICATION
- Engine model
- V2403-M-DI-T-E3B
- Emission regulation
- EPA/CARB interim Tier 4 level + EU Stage IIIA
- Type
- Vertical, water cooled 4-cycle diesel engine
- Cylinders
- 4
- Bore and stroke
- mm (in)
- 87.0 x 102.4 (3.43 x 4.031)
- Displacement
- L (cu.in)
- 2.434 (148.5)
- Aspiration
- Turbocharged
- Aftertreatment
- -
- Rated output / speed*1
- kW (HP) / rpm
- 36.5 (48.9) / 2200
- Maximum torque / speed*1
- Nm (lb-ft) / rpm
- 183.0 (135.0) / 1200
- Combustion system
- Direct injection
- Fuel system
- In-line pump
- Length x Width x Height*2
(without aftertreatment unit) - mm (in)
- 646 x 495 x 728 (25.4 x 19.5 x 28.7)
- Length x Width x Height*3
(with aftertreatment unit) - mm (in)
- -
- Dry weight
- kg (lb)
- 201 (443)
-
Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.
-
1: SAE J1995 gross intermittent
*2: Exclude cooling fan and exclude aftertreatment unit
*3: Exclude cooling fan and include aftertreatment unit on engine
Photographs may show non-standard equipment.
DIMENSIONS
Dimensions and weight depend on composed specifications.
PERFORMANCE CURVES
FEATURES and BENEFITS
Emissions
The V2403-M turbocharged engine complies with the EPA/CARB
interim Tier 4 + EU Stage IIIA emissions regulations.
Durable Power
The Kubota 03-M Series is well known for its industrial applications.
With numerous features such as a built-in solenoid, low fan position,
and single-side serviceability, this engine provides excellent
performance and flexibility.
The cooling water passages between the cylinder bores features
Kubota’s original casting technology as a countermeasure against
the heat load caused by high power density, providing both
superior endurance and reliable engine performance.
The V2403-M-DI turbocharged engine offers a seamless transition from
EPA Tier 2 to EPA interim Tier 4 by maintaining the same footprint and
hardware mounting points with minimal performance changes from
EPA Tier 2 engines.
Clean and Quiet Power
Kubota has increased the fuel injection pressure to achieve more
complete combustion to reduce particulate matter (PM) levels.
The half-float valve cover and MoS2-coated pistons reduce noise
levels by 1.0-2.0 dBA compared to conventional diesel engines
and decrease vibrations transmitted from the valve area.
Option
Kubota 03-M Series engines offer side power take-off (PTO) in
response to the trend of the use of hydraulic control devices in
industrial machines. A hydraulic pump can be installed at the two
side PTO locations.
Indirect-Injection engines are also available.