D902-ES10
GENERAL SPECIFICATION
- Engine model
- D902-ES10
- Emission regulation
- EPA/CARB Tier4 + EU Stage V + China NR IV
- Type
- Vertical, water cooled 4-cycle diesel engine
- Cylinders
- 3
- Bore and stroke
- mm (in)
- 72.0 x 73.6 (2.83 x 2.90)
- Displacement
- L (cu.in)
- 0.898 (54.80)
- Aspiration
- Naturally aspirated
- Aftertreatment
- -
- Rated output / speed*1
- kW (HP) / rpm
- 14.6(19) / 2900
- Maximum torque / speed*1
- Nm (lb-ft) / rpm
- 56.1 (41.4) / 2600
- Combustion system
- Indirect Injection
- Fuel system
- TVCR
- Length x Width x Height*2
(without aftertreatment unit) - mm (in)
- 434 × 389 × 544
(17.1 × 15.3 × 21.4)
- Length x Width x Height*3
(with aftertreatment unit) - mm (in)
- -
- Dry weight
- kg (lb)
- 72 (159)
-
Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.
- -
14.6kW @ 2900 rpm
Photographs may show non-standard equipment.
FEATURES and BENEFITS
Suppress black smoke
The D902-ES10 engine is capable of complying with the
latest emission standards (output of below 19kW) around the
world, including the most stringent of China’s national smoke
regulations, Category III. The amount of black smoke is reduced
to an imperceptible level at start, acceleration, and a rapid
increase in workload.
Improvement
in drivability and serviceability
The D902-K-E4 engine is capable of communicating via CAN,
thus allowing engine speed and torque to be controlled using
signals from vehicles. Due to superior torque characteristics,
lower rotation due to a rapid increase in workload is
suppressed, enhancing drivability and work efficiency.
Low fuel consumption
Fuel efficiency improved by about 5% compared to conventional
model.
Compatibility
The D902-K-E4 engine uses the same external dimensions,
locations of ports and an engine mount, and PTO as its current
model, thus facilitating easy model upgrades.